No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


5288 V3 Server V100R003 User Guide 26

This document describes the features, appearance, and technical specifications of the 5288 V3 server, and how to install, power on, and power off the 5288 V3 server, connect cables, and install an operating system (OS) for it.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Boot from iSCSI Function for an SP230 flexible NIC

(Optional) Configuring the Boot from iSCSI Function for an SP230 flexible NIC

An SP230 supports boot from PXE or iSCSI. Boot from PXE is enabled by default. To boot from iSCSI, enable it first.


Before you configure the server to boot from iSCSI, ensure that the operating system (OS) of the server supports the iSCSI protocol stack and has the iSCSI driver.

Before configuring the boot from iSCSI function, load the optional ROM for iSCSI. For details, see "Upgrading the Intel X540 flexible NIC Firmware" in the HUAWEI Server Firmware Upgrade Guide.

Updated: 2018-11-26

Document ID: EDOC1000080031

Views: 138479

Downloads: 2336

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next