No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

5288 V3 Server V100R003 User Guide 26

This document describes the features, appearance, and technical specifications of the 5288 V3 server, and how to install, power on, and power off the 5288 V3 server, connect cables, and install an operating system (OS) for it.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing an SD Card

Removing an SD Card

Remove a Secure Digital (SD) card before replacing it with a new one.

Procedure

  1. Wear an ESD wrist strap. For details, see Safety Instructions.
  2. Determine the rack number and chassis number of the server to be removed, and label its panel to prevent misoperations.
  3. Power off the 5288 V3. For details, see Powering Off the Server.
  4. Remove all external cables such as power and network cables.
  5. Remove the 5288 V3 and put it on an ESD desktop. For details, see Removing the Server.
  6. Remove the chassis cover. For details, see Removing the Chassis Cover.
  7. Remove the PCIe card from the mainboard. For details, see Removing a PCIe Card from the Mainboard.
  8. Determine the position of the SD card to be removed. See Figure 7-98.SD card 1 is above the SD card mezzanine card, and SD card 2 is below the SD card mezzanine card.

    Figure 7-98 SD card position

  9. If the SD2 card needs to be removed, remove the mezzanine SD card first; otherwise, go to Step 10.

    1. Loosen the two screws. See step (1) in Figure 7-99.
      Figure 7-99 Removing a mezzanine SD card

    2. Lift the mezzanine card till its connector is disconnected from the mainboard. See step (2) in Figure 7-99.

  10. Press the SD card in the arrow direction. See step (1) in Figure 7-100.

    Figure 7-100 Removing an SD card

  11. Remove the SD card from the mezzanine card. See step (2) in Figure 7-100.
  12. Place the removed SD card in an ESD bag.
Translation
Download
Updated: 2018-11-26

Document ID: EDOC1000080031

Views: 126743

Downloads: 2333

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next