No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

5288 V3 Server V100R003 User Guide 26

This document describes the features, appearance, and technical specifications of the 5288 V3 server, and how to install, power on, and power off the 5288 V3 server, connect cables, and install an operating system (OS) for it.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing a Front Mounting Ear Plate

Removing a Front Mounting Ear Plate

Remove a front mounting ear plate before replacing it with a new one.

The server has two front mounting ears. One is on the left of its front panel, and the other is on the right. This topic uses the front mounting ear on the left as an example.

Procedure

  1. Wear an ESD wrist strap. For details, see Safety Instructions.
  2. Determine the rack number and chassis number of the server to be removed, and label its panel to prevent misoperations.
  3. Power off the 5288 V3. For details, see Powering Off the Server.
  4. Determine the position of the mounting ear on the 5288 V3. See Figure 7-119.

    Figure 7-119 Position of the mounting ear

  5. Loosen the screws that secure the front mounting ear to the 5288 V3. See step (1) in Figure 7-120.

    Figure 7-120 Removing a front mounting ear

  6. Pull out the front mounting ear in the arrow direction. See step (2) in Figure 7-120.
  7. Loosen the screws on the front mounting ear. See step (3) in Figure 7-120.
  8. Remove the front mounting ear in the arrow direction. See step (4) in Figure 7-120.
  9. Remove the cable from the mounting ear plate, and remove the mounting ear plate in the arrow direction. See Figure 7-121.

    Figure 7-121 Removing a front mounting ear plate

  10. Place the removed front mounting ear plate in the ESD bag.
Translation
Download
Updated: 2018-11-26

Document ID: EDOC1000080031

Views: 125669

Downloads: 2333

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next