No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

5288 V3 Server V100R003 User Guide 26

This document describes the features, appearance, and technical specifications of the 5288 V3 server, and how to install, power on, and power off the 5288 V3 server, connect cables, and install an operating system (OS) for it.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a DC PSU

Installing a DC PSU

Install a DC power supply unit (PSU) to replace the original one.

A DC PSU needs to be added to improve reliability when the 5288 V3 is configured with only one DC PSU.

Procedure

  1. Wear an ESD wrist strap. For details, see Safety Instructions.
  2. Remove the PSU to be replaced. For details, see Removing a DC PSU.
  3. Take the spare DC PSU out of its ESD bag.
  4. Push the spare DC PSU along the guide rails into a slot (for example, slot 1) until you hear a sound.

    The PSU latch snaps in so that the PSU does not move. See Figure 7-21.

    Figure 7-21 Installing a DC PSU

  5. Connect the power cable to the wiring terminal on the PSU until the power cables are latched. See Figure 7-22.

    • Connect the OT terminal on the negative power cable to the NEG(-) wiring terminal on the PSU.
    • Connect the OT terminal on the positive power cable to the RTN(+) wiring terminal on the PSU.
    • Connect the OT terminal on the ground cable to the ground terminal on the PSU.
    Figure 7-22 Connecting power cables to a DC PSU

Translation
Download
Updated: 2018-11-26

Document ID: EDOC1000080031

Views: 137634

Downloads: 2336

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next