No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


5288 V3 Server V100R003 User Guide 26

This document describes the features, appearance, and technical specifications of the 5288 V3 server, and how to install, power on, and power off the 5288 V3 server, connect cables, and install an operating system (OS) for it.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the iBMC WebUI

Logging In to the iBMC WebUI

Log in to the iBMC WebUI using a PC that has Windows 7 and Internet Explorer 8.0 installed.

Before using the remote control function, ensure that the OS, browser, and Java Runtime Environment (JRE) of the required versions have been installed on the local PC. For details about software versions, see HUAWEI Rack Server iBMC User Guide.

Ensure that the local PC meets the following networking conditions:

  • The local PC is connected to the iBMC management network port on the server by using a network cable.
  • The IP addresses of the local PC and the iBMC management network port are on the same network segment.

Table 9-1 lists the data to be obtained before you log in to the iBMC WebUI.

Table 9-1 Data to be obtained





User login information

User name

User name for logging in to the iBMC WebUI



User password for logging in to the iBMC WebUI


The default iBMC user name is root, which belongs to the administrator group. The default password is Huawei12#$.


IP address

IP address of the iBMC management network port on the server


  1. Connect the local PC to the iBMC management network port on the server by using a network cable.

    Figure 9-3 shows the network diagram.

    Figure 9-3 Network diagram

  2. Open a browser, such as Internet Explorer, on the PC.
  3. In the address box, enter the iBMC address in the format of https://IP address of the iBMC management network port on the server (for example,
  4. Press Enter.

    The iBMC login page is displayed, as shown in Figure 9-4.

    • If the message "There is a problem with this website's security certificate" is displayed, click Continue to this website (not recommended).
    • If the system displays the Security Alert dialog box indicating a certificate error, click Yes.
    Figure 9-4 Logging in to iBMC

  5. On the login page, enter the user name and password for logging in to the iBMC WebUI.


    Your user account will be locked after five consecutive login failures with wrong passwords. If your user account is locked, log in again 5 minutes later.

  6. Select This iBMC from the Domain drop-down list.
  7. Click Log In.

    The Information Summary page is displayed, showing the user name in the upper right corner.

Updated: 2018-11-26

Document ID: EDOC1000080031

Views: 138889

Downloads: 2336

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next