No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


5288 V3 Server V100R003 User Guide 26

This document describes the features, appearance, and technical specifications of the 5288 V3 server, and how to install, power on, and power off the 5288 V3 server, connect cables, and install an operating system (OS) for it.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changing an iBMC User Password

Changing an iBMC User Password

Change the default password promptly and change the user password periodically to ensure system security. The following describes how to change a user password on the iBMC WebUI. For details about how to change a password on the iBMC CLI, see HUAWEI Rack Server iBMC User Guide.

Table 5-4 lists the default iBMC user name and password.

Table 5-4 Default user name and password

Default User Name and Password


  • Use name: root
  • Password: Huawei12#$

The default iBMC user belongs to the administrator group and has full rights to access all iBMC resources and perform all operations.


  1. Log in to the iBMC WebUI over a network port. For details, see Logging In to the iBMC WebUI.
  2. Choose Config > Security Enhance.
  3. Select Enable for Password Complexity Check.

    The system will perform a password complexity check when a new password is set.

  4. Choose Config > Local User, as shown in Figure 5-15.

    Figure 5-15 Local User page

  5. Click next to the user whose password needs to be changed.
  6. Change the password as prompted.

    • When the password complexity check function is disabled, the password can be empty or a string of any characters fewer than 20 characters.
    • When the password complexity check function is enabled, the password must meet the following requirements:
      • Must contain 8 to 20 characters.
      • Must contain at least one space or one of the following special characters:


      • Must contain at least two types of the following characters:
        • Uppercase letters
        • Lowercase letters
        • Digits
      • Must not be same as the user name or the reverse of the user name.

Updated: 2018-11-26

Document ID: EDOC1000080031

Views: 125376

Downloads: 2333

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next