No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

5288 V3 Server V100R003 User Guide 26

This document describes the features, appearance, and technical specifications of the 5288 V3 server, and how to install, power on, and power off the 5288 V3 server, connect cables, and install an operating system (OS) for it.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the 5288 V3

Checking the 5288 V3

Log in to the iBMC WebUI or CLI to check the health status of the 5288 V3. Ensure that its health status meets the environment requirements for software installation.

Table 5-3 describes the default information for logging in to the 5288 V3 iBMC WebUI or CLI. For details about the CLI, see HUAWEI Rack Server iBMC UserGuide.

Table 5-3 Default information

Item

Parameter

Default Value

iBMC management network port information

IP address and subnet mask of the management network port

  • IP address: 192.168.2.100
  • Subnet mask: 255.255.255.0

iBMC management system login information

User name and password

  • User name: root
  • Password: Huawei12#$

BIOS

Password

The default BIOS password is Huawei12#$ for the American keyboard, Huqzei&é34 for the French keyboard, and Huawei12£$ for the English keyboard.

NOTE:

When entering the BIOS password on the remote virtual console:

  • If the keyboard type configured in the OS is the same as the actual keyboard type, enter the password by using the actual keyboard.
  • If the keyboard type configured in the OS is different from the actual keyboard type, enter the password by using the keyboard configured in the OS.

Workflow

Check the 5288 V3 by following the sequence described in Figure 5-2. Determine the check method based on site requirements.

Figure 5-2 Process for checking the 5288 V3

Procedure

  • Check indicator status.

    Observe the 5288 V3 indicator status, and check that hardware devices are properly operating.

    For details, see 2.4 Indicators and Buttons.

  • Check the 5288 V3 using the iBMC WebUI.
    1. Log in to the iBMC WebUI. For details, see 9.2 Logging In to the iBMC WebUI.
      NOTE:

      You are advised to change the default password when you log in to iBMC for the first time. For details, see 5.6 Changing an iBMC User Password.

    2. View the 5288 V3 version information.

      Choose System > Firmware Upgrade, and view server versions, as shown in Figure 5-3.

      Check that the 5288 V3 versions meet site requirements.

      Figure 5-3 Querying version information
    3. View the 5288 V3 health status and alarms.

      Choose Information > Information Summary, and view server health status, as shown in Figure 5-4.

      Figure 5-4 Querying the health status for the 5288 V3
    4. Clear alarms. For details, see HUAWEI Rack Server AlarmHandling (iBMC).
      NOTE:

      If the query result in c indicates that no alarm is generated for the server, skip this step.

  • Check the 5288 V3 using the iBMC CLI.
    1. Log in to the iBMC CLI.
      1. Set an IP address for the PC, and ensure that the IP address is on the same network segment as the iBMC management network port.
      2. Connect the PC to the 5288 V3 iBMC management network port by using a network cable.
      3. Run the Secure Shell (SSH) tool on the PC, and enter the IP address of the iBMC management network port, user name, and password to log in.
        NOTE:

        By default, SSH is used to log in to iBMC. If the SSH service is disabled, enable it by choosing Config > Service Settings on the iBMC WebUI.

    2. View the 5288 V3 version information.

      Check that the 5288 V3 versions meet site requirements.

      iBMC / # ipmcget -d ver 
       ------------------- iBMC INFO -------------------                                
       IPMC               CPU:           Hi1710                                         
       IPMI           Version:           2.0                                            
       CPLD           Version:           (U46)1.05                                      
       Active iBMC    Version:           (U25)1.62                                      
       Active iBMC      Built:           22:00:15 Jun 12 2015                           
       Backup iBMC    Version:           1.59                                           
       SDK            Version:           1.51                                           
       SDK              Built:           17:00:37 May 17 2015                           
       Active Uboot   Version:           1.1.35 (Mar 25 2015 - 10:24:41)                
       Backup Uboot   Version:           1.1.35 (Mar 25 2015 - 10:24:41)   
       ----------------- Product INFO ----------------- 
       Product             ID:           0x0001 
       Product           Name:           5288 V3 
       BIOS           Version:           (U47)1.36 
       -------------- Mother Board INFO --------------- 
       Mainboard      BoardID:           0x0002 
       Mainboard          PCB:           .C 
       ------------------- Flexible NIC INFO ------------------- 
       SM210          BoardID:           0x0014 
       SM210              PCB:           .A 
       ----------------Raid Card INFO ------------------- 
       SR130          BoardID:           0x002C 
       SR130              PCB:           .A 
       -------------- HDD Backplane INFO -------------- 
       BC11THBK       BoardID:           0x00cb 
       BC11THBK           PCB:           .A 
       BC11THBK  CPLD Version:           (U1011)1.05 
       BC11THBJ       BoardID:           0x00ca 
       BC11THBJ           PCB:           .A 
       BC11THBJ  CPLD Version:           (U3)1.05
      • CPLD Version: indicates the current complex programmable logical device (CPLD) version of the 5288 V3.
      • BIOS Version: indicates the basic input/output system (BIOS) version of the 5288 V3.
      • Active iBMC Version: indicates the active iBMC version of the 5288 V3.
      • Backup iBMC Version: indicates the backup iBMC version of the 5288 V3.
    3. Query the health status for the 5288 V3.
      iBMC / # ipmcget -d health 
       System in health state
      • If the message "System in health state" is displayed, no further action is required.
      • If an alarm is generated, clear the alarm by performing d and e.
    4. Query alarms for the 5288 V3.
      iBMC:/->ipmcget -d healthevents 
       System in health state
    5. Clear alarms. For details, see HUAWEI Rack Server AlarmHandling (iBMC).
Translation
Download
Updated: 2018-11-26

Document ID: EDOC1000080031

Views: 140339

Downloads: 2336

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next