No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

5288 V3 Server V100R003 User Guide 26

This document describes the features, appearance, and technical specifications of the 5288 V3 server, and how to install, power on, and power off the 5288 V3 server, connect cables, and install an operating system (OS) for it.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring RAID

Configuring RAID

Before configuring RAID, you need to obtain the IP address of the iBMC management network port, and the user name and password for logging in to the iBMC WebUI. For details about how to obtain the IP address for the management network port and how to operate the iBMC, see HUAWEI Rack Server iBMC User Guide.

Procedure

View the RAID controller card information on the iBMC WebUI.

  1. Log in to the iBMC WebUI.

    For details, see Logging In to the iBMC WebUI.

  2. Choose Information on the menu bar and choose Component Info or System Info in the navigation tree. The Component Info or System Info page is displayed.
  3. View the RAID controller card information, as shown in Figure 5-5 or Figure 5-6.
    Figure 5-5 Component information example

    Figure 5-6 System information example

    NOTE:

    The preceding information is for reference only. The actual information displayed may differ.

    Configure RAID.

  4. Configure RAID.

    The configuration procedure varies according to the RAID controller card type. For details about how to configure RAID, see HUAWEI V2&V3 Server RAID Controller Card User Guide.

    Supported RAID controller cards: SR120 (LSI SAS2308), SR130 (LSI SAS3008), SR430C (1 GB/2 GB, LSI SAS3108), SR630C (1 GB/2 GB, LSI SAS3108), and SP435 (PM8060)

Translation
Download
Updated: 2018-11-26

Document ID: EDOC1000080031

Views: 126329

Downloads: 2333

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next