No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

5288 V3 Server V100R003 User Guide 26

This document describes the features, appearance, and technical specifications of the 5288 V3 server, and how to install, power on, and power off the 5288 V3 server, connect cables, and install an operating system (OS) for it.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to a Server Using the Independent Remote Console

Logging In to a Server Using the Independent Remote Console

When the client OS and iBMC version meet requirements for the independent remote console, logging in to the real-time desktop of a server using the independent remote console is more convenient than that using the remote virtual console accessed through the iBMC WebUI.

The independent remote console can run in an environment that meets the requirements listed in Table 9-2.

Table 9-2 Environmental requirements

Client OS Type

Client OS Version

Management Software

Windows

Windows 7 32-bit or 64-bit

iBMC 2.28 or later

Windows 8 32-bit or 64-bit

Windows 10 32-bit or 64-bit

Windows Server 2008 R2 32-bit or 64-bit

Windows Server 2012 64-bit

Ubuntu

Ubuntu 14.04 LTS

Ubuntu 16.04 LTS

Mac

Mac OS X El Capitan

Ensure that the following requirements are met before logging in to the real-time desktop of a server:

  • The client (for example, a PC) is connected to the iBMC management network port of the server to be accessed.
  • You have obtained the iBMC management network port IP address and port number (HTTPS port number).
  • You have obtained the user name and password for logging in to iBMC.
  • You have downloaded the Independent Remote Console software package to a client, such as a PC, and decompressed the package.

    Download link: Independent Remote Console

NOTE:
  • kvm_client_windows.zip is for Windows OSs.
  • kvm_client_ubuntu.zip is for Ubuntu OSs.
  • kvm_client_mac.zip is for Mac OSs.

Procedure

  • Logging In to a Server Using the Independent Remote Console (Windows)
    1. Configure an IP address for the client (PC) to enable communication between the client and the iBMC. That is, the IP address configured and the iBMC management network port IP address must be in the same network segment.
    2. Double-click KVM.exe. The independent remote console interface is displayed, as shown in Figure 9-6.
      Figure 9-6 Login interface

    3. Enter the network address, user name, and password as instructed.

      The network address can be in any of the following formats:

      • iBMC management network port IP address (IPv4 or IPv6 address):Port number
      • iBMC domain name address:Port number
      NOTE:
      • Enter an IPv6 address in brackets, and an IPv4 address directly. For example, [2001::64]:444, and 192.168.100.1:444.
      • The default port number 443 can be skipped.
    4. Select the login mode, and click Connect.
      • Shared Mode: allows two users to access and manage a server at the same time. The two users can see each other's operations.
      • Private Mode: allows only one user to access and manage a server.

        Information shown in Figure 9-7 is displayed.

      Figure 9-7 Security risk information

    5. Perform any of the following operations based on actual situation:
  • Click Yes to open the KVM console.
  • Click No to return to the login interface.
  • Click Import CA to import the CA certificate (*.cer, *.crt, or *.pem). After the CA certificate is imported, the security risk dialog box will no longer be displayed.

    The Remote Virtual Console of the server is displayed, as shown in Figure 9-8.

Figure 9-8 The Remote Virtual Console of the server

  • Logging In to a Server Using the Independent Remote Console (Ubuntu)
    1. Configure an IP address for the client (PC) to enable communication between the client and the iBMC. That is, the IP address configured and the iBMC management network port IP address must be in the same network segment.
    2. Open the console, and set the folder, in which the independent remote console is stored, as the working folder.
    3. Run the chmod 777 KVM.sh command to set the permission for the independent remote console.
    4. Run ./KVM.sh to start the independent remote console. The independent remote console interface is displayed, as shown in Figure 9-9.
      Figure 9-9 Login interface

    5. Enter the network address, user name, and password as instructed.

      The network address can be in any of the following formats:

      • iBMC management network port IP address (IPv4 or IPv6 address):Port number
      • iBMC domain name address:Port number
      NOTE:
      • Enter an IPv6 address in brackets, and an IPv4 address directly. For example, [2001::64]:444, and 192.168.100.1:444.
      • The default port number 443 can be skipped.
    6. Select the login mode, and click Connect.
      • Shared Mode: allows two users to access and manage a server at the same time. The two users can see each other's operations.
      • Private Mode: allows only one user to access and manage a server.

        Information shown in Figure 9-10 is displayed.

      Figure 9-10 Security risk information

    7. Perform any of the following operations based on actual situation:
  • Click Yes to open the KVM console.
  • Click No to return to the login interface.
  • Click Import CA to import the CA certificate (*.cer, *.crt, or*.pem). After the CA certificate is imported, the security risk dialog box will no longer be displayed.

    The Remote Virtual Console of the server is displayed, as shown in Figure 9-11.

Figure 9-11 The Remote Virtual Console of the server

  • Logging In to a Server Using the Independent Remote Console (Mac)
    1. Configure an IP address for the client (PC) to enable communication between the client and the iBMC. That is, the IP address configured and the iBMC management network port IP address must be in the same network segment.
    2. Open the console, and set the folder, in which the independent remote console is stored, as the working folder.
    3. Run the chmod 777 KVM.sh command to set the permission for the independent remote console.
    4. Run ./KVM.sh to start the independent remote console. The independent remote console interface is displayed, as shown in Figure 9-12.
      Figure 9-12 Login interface

    5. Enter the network address, user name, and password as instructed.

      The network address can be in any of the following formats:

      • iBMC management network port IP address (IPv4 or IPv6 address):Port number
      • iBMC domain name address:Port number
      NOTE:
      • Enter an IPv6 address in brackets, and an IPv4 address directly. For example, [2001::64]:444, and 192.168.100.1:444.
      • The default port number 443 can be skipped.
    6. Select the login mode, and click Connect.
      • Shared Mode: allows two users to access and manage a server at the same time. The two users can see each other's operations.
      • Private Mode: allows only one user to access and manage a server.

        Information shown in Figure 9-13 is displayed.

      Figure 9-13 Security risk information

    7. Perform any of the following operations based on actual situation:
  • Click Yes to open the KVM console.
  • Click No to return to the login interface.
  • Click Import CA to import the CA certificate (*.cer, *.crt, or *.pem). After the CA certificate is imported, the security risk dialog box will no longer be displayed.

    The Remote Virtual Console of the server is displayed, as shown in Figure 9-14.

Figure 9-14 The Remote Virtual Console of the server

Translation
Download
Updated: 2018-11-26

Document ID: EDOC1000080031

Views: 137568

Downloads: 2336

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next