No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

5288 V3 Server V100R003 User Guide 26

This document describes the features, appearance, and technical specifications of the 5288 V3 server, and how to install, power on, and power off the 5288 V3 server, connect cables, and install an operating system (OS) for it.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Standard RAID Controller Card

Installing the Standard RAID Controller Card

Install a standard RAID controller card replace the original one.

Procedure

  1. Wear an ESD wrist strap. For details, see Safety Instructions.
  2. Remove the standard RAID controller card to be replaced. For details, see Removing the Standard RAID Controller Card.
  3. Take the spare standard RAID controller card out of its ESD bag.
  4. Install the standard RAID controller card.

  5. Check the chip model of the RAID controller card to be installed.

    If the chip model of the RAID controller card to be installed is LSI SAS3108, remove the trans flash module (TFM) first. For details, see Installing the Supercapacitor (Standard RAID Controller Card).

    If the chip model of the RAID controller card to be installed is PM8060, remove the cable between the supercapacitor and the RAID controller card. For details, see Installing the Supercapacitor (Standard RAID Controller Card).

  6. Connect the SAS cables to the standard RAID controller card.
  7. Install the chassis cover. For details, see Installing the Chassis Cover.
  8. Install the 5288 V3. For details, see Installing the Server.
  9. Connect all internal cables such as power and network cables. For details, see Connecting External Cables.
  10. Power on the 5288 V3. For details, see Powering On the Server.
  11. Log in to the RAID configuration screen to check whether RAID configuration needs to be imported or activated. For details, see the HUAWEI V2&V3 Server RAID Controller Card User Guide.
Translation
Download
Updated: 2018-11-26

Document ID: EDOC1000080031

Views: 138107

Downloads: 2336

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next