No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

5288 V3 Server V100R003 User Guide 26

This document describes the features, appearance, and technical specifications of the 5288 V3 server, and how to install, power on, and power off the 5288 V3 server, connect cables, and install an operating system (OS) for it.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Connecting a Serial Cable

Connecting a Serial Cable

The 5288 V3 server provides one standard DB9 serial port on the rear, which works as the system serial port by default. You can set it as the iBMC serial port on the iBMC CLI.

The serial port can be used in the following scenarios:

  • Used as the system serial port to monitor the status of the operating system (OS).
  • Used as the iBMC serial port for debugging and fault locating.

For details about the command for setting the serial port to the iBMC serial port, see the HUAWEI Rack Server iBMC User Guide.

The following tools are available:

ESD wrist strap or ESD gloves: used to prevent ESD damage

Procedure

  1. Align the connector on the serial cable with the serial port, and insert the connector into the serial port, as shown in Figure 3-27.

    Figure 3-27 Connecting a serial cable

    Do not use excessive force; otherwise, the pins in the serial port may be damaged.

  2. Tighten the screws on the connector to secure the serial cable.
Translation
Download
Updated: 2018-11-26

Document ID: EDOC1000080031

Views: 125350

Downloads: 2333

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next