No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


5288 V3 Server V100R003 User Guide 26

This document describes the features, appearance, and technical specifications of the 5288 V3 server, and how to install, power on, and power off the 5288 V3 server, connect cables, and install an operating system (OS) for it.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing an Internal Cable

Installing an Internal Cable

Install an internal cable to replace the original one.


  1. Wear an ESD wrist strap. For details, see Safety Instructions.
  2. Remove the cable to be replaced. For details, see Removing an Internal Cable.
  3. Take a spare cable out of the ESD bag.
  4. Connect one end of the spare cable to the hard disk backplane.
  5. Determine whether to install the mainboard frame.

  6. Press and hold down the release spring and push the mainboard frame in the arrow direction until it cannot move forward. See Figure 7-36.

    Figure 7-36 Pushing the mainboard frame

  7. Tighten the screws that secure the mainboard to the chassis. See Figure 7-37.

    Figure 7-37 Installing the mainboard frame

  8. Connect cables to the mainboard.
  9. Install fan module brackets in the chassis. See Figure 7-38.

    Figure 7-38 Installing fan module brackets

  10. Insert fan modules into the slots and ensure that fan module cable connectors fit into the ports on the mainboard. See Figure 7-39.

    Figure 7-39 Installing fan modules

  11. Install the air duct. For details, see Installing the Air Duct.
  12. Install the chassis cover. For details, see Installing the Chassis Cover.
  13. Install the 5288 V3. For details, see Installing the Server.
  14. Connect all internal cables such as power and network cables. For details, see Connecting External Cables.
  15. Power on the 5288 V3. For details, see Powering On the Server.
Updated: 2018-11-26

Document ID: EDOC1000080031

Views: 137195

Downloads: 2336

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next