No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


5288 V3 Server V100R003 User Guide 26

This document describes the features, appearance, and technical specifications of the 5288 V3 server, and how to install, power on, and power off the 5288 V3 server, connect cables, and install an operating system (OS) for it.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying the IP Address of the Management Network Port

Querying the IP Address of the Management Network Port

The default IP address of the iBMC management network port is for 5288 V3 servers.

You can query the actual IP address of the iBMC management network port on the basic input/output system (BIOS) or iBMC CLI.

Querying the IP Address on the BIOS

  1. Restart the server.

    1. Connect a mouse and a keyboard to the two USB ports on the server.
    2. Use a VGA cable to connect a monitor to the VGA port on the server.
    3. Restart the OS.
    4. Press Delete repeatedly when the screen shown in Figure1 BIOS startup screen is displayed during server startup.
      Figure 9-1 BIOS startup screen
    5. Enter a BIOS password as prompted.

      The BIOS Setup Utility is displayed.

  2. Choose Advanced > IPMI iBMC Configuration and press Enter.

    The IPMI iBMC Configuration screen is displayed.

  3. Select iBMC Configuration and press Enter.

    The iBMC Configuration screen is displayed, showing information about the IP address of the iBMC network port. See Figure 9-2.

    Figure 9-2 iBMC Configuration

Querying the IP Address on the iBMC CLI

  1. Log in to the iBMC CLI.

    For details, see Logging In to the iBMC CLI.

  2. Run the ipmcget –d ipinfo command.

    For details, see HUAWEI Rack Server iBMC User Guide.

Updated: 2018-11-26

Document ID: EDOC1000080031

Views: 126719

Downloads: 2333

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next