No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

5288 V3 Server V100R003 User Guide 26

This document describes the features, appearance, and technical specifications of the 5288 V3 server, and how to install, power on, and power off the 5288 V3 server, connect cables, and install an operating system (OS) for it.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Mainboard Layout

Mainboard Layout

Figure 2-12 show the ports on the 5288 V3 mainboard.

Figure 2-12 Mainboard layout (dual-CPU configuration)

1

Serial port (J55 COM CONN)

2

VGA port (J54)

3

Management network port (J33)

4

USB 3.0 port 2 (J39)

5

USB 3.0 port 1 (J40)

6

UID button/indicator

7

PCIe x8 slot 5 (corresponding to CPU 1, J49 PCIe x8 slot HH/HL)

8

PCIe x8 slot 4 (corresponding to CPU 1, J50 PCIe x8 slot HH/HL)

9

I/O flexible NIC connector (J46-J45)

10

PCH Mini-SAS HD connector (J1001)

11

Rear hard disk backplane power connector (J28 PWR CONN2)

12

Jumper (J36)

NOTE:

COM_SW pins are used for changing the serial port direction, and CLR_BMC_PW pins are used for restoring the default iBMC settings.

13

RAID controller card (J44)

14

Fan 4 connector (J130)

15

Right mounting ear connector (J43)

16

Fan 3 connector (J131)

17

Fan 2 connector (J132)

18

Fan 1 connector (J133)

19

USB 3.0 port (J53)

20

Rear hard disk backplane power connector (J30 PWR CONN1)

21

Front hard disk backplane signal connector (J1003 HDD BP CONN)

22

Left mounting ear connector (J42)

23

SATA/SATADOM 1 (J37)

24

SATA/SATADOM 2 (J38)

25

PSU backplane connector (J31)

26

Rear hard disk backplane power connector (J29 PWR CONN3)

27

TPM CONN (J35)

28

SoftRAID key (J51)

29

System battery

30

Dual-SD card module (J57 SD board)

31

Riser card slot (corresponding to CPU 2, J3-J1005)

-

-

Translation
Download
Updated: 2018-11-26

Document ID: EDOC1000080031

Views: 140748

Downloads: 2336

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next