No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

5288 V3 Server V100R003 User Guide 26

This document describes the features, appearance, and technical specifications of the 5288 V3 server, and how to install, power on, and power off the 5288 V3 server, connect cables, and install an operating system (OS) for it.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Management Network Port IP Address

Setting the Management Network Port IP Address

Set the management network IP address through the iBMC WebUI, BIOS, and LCD of the iBMC. You can also set the IP address by running the ipaddr command on the iBMC CLI of the iBMC. For details, see HUAWEI Rack Server iBMC User Guide.

Table 5-5 lists the default data for setting the management network IP address.

Table 5-5 Default information

Item

Parameter

Default Value

iBMC management network port information

IP address and subnet mask of the management network port

  • IP address: 192.168.2.100
  • Subnet mask: 255.255.255.0

iBMC management system login information

User name and password

  • User name: root
  • Password: Huawei12#$

BIOS

Password

The default BIOS password is Huawei12#$ for the American keyboard, Huqzei&é34 for the French keyboard, and Huawei12£$ for the English keyboard.

NOTE:

When entering the BIOS password on the remote virtual console:

  • If the keyboard type configured in the OS is the same as the actual keyboard type, enter the password by using the actual keyboard.
  • If the keyboard type configured in the OS is different from the actual keyboard type, enter the password by using the keyboard configured in the OS.

Procedure

  • Set the IP address of the management network port on the iBMC WebUI.
    1. Log in to the server iBMC WebUI.

      For details, see Logging In to the iBMC WebUI.

    2. Choose Config > Network Settings.

      The Network Settings page is displayed.

    3. Set an IP address for the management network port, as shown in Figure 5-16.
      Figure 5-16 Setting an IP address for the management network port

    4. Click Save.

      No further action is required.

  • Set the IP address in the BIOS.
    1. Click on the menu bar of the remote virtual console.

      For details about how to log in to the remote virtual console, see Logging In to the Remote Virtual Console.

    2. Select Reset.

      The system displays "Are you sure to perform this operation?"

    3. Click Yes.

      The server restarts.

    4. Press Delete repeatedly when the screen shown in the following figure is displayed during server startup.
      Figure 5-17 BIOS startup screen

    5. Enter a BIOS password as prompted. The screen for setting the BIOS is displayed.
    6. Choose Advanced > IPMI iBMC Configuration and press Enter.

      The IPMI iBMC Configuration screen is displayed.

    7. Select iBMC Configuration and press Enter.

      The iBMC Configuration screen is displayed, showing information about the IP address of the iBMC network port. See Figure 5-18.

      Figure 5-18 iBMC Configuration

    8. Select IP Address in IPV4 configuration and press Enter. On the configuration screen, set the IPv4 address of the iBMC management network port, as shown in Figure 5-19.
      Figure 5-19 Setting the IPv4 address of the iBMC management network port

    9. Set the parameter in IPV4 configuration and IPV6 Configuration for the iBMC management network port in the same way.
    10. Press F10 to save settings and exit.
Translation
Download
Updated: 2018-11-26

Document ID: EDOC1000080031

Views: 125482

Downloads: 2333

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next