No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

5288 V3 Server V100R003 User Guide 26

This document describes the features, appearance, and technical specifications of the 5288 V3 server, and how to install, power on, and power off the 5288 V3 server, connect cables, and install an operating system (OS) for it.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to a Server over a Serial Port Using PuTTY

Logging In to a Server over a Serial Port Using PuTTY

Use PuTTY to log in to a server over a serial port in any of the following scenarios:

  • The server is configured for the first time at a site.
  • A remote connection to the server cannot be established.

Ensure that the following requirements are met:

  • The local PC is connected to the server through a serial cable.
  • PuTTY is installed.

    You can download PuTTY from chiark website. You are advised to use the latest version of PuTTY, otherwise you may fail to log in to the server.

  • User name for logging in to the server
  • Password for logging in to the server

Procedure

  1. Double-click PuTTY.exe.

    The PuTTY Configuration window is displayed.

  2. In the navigation tree, choose Connection > Serial.
  3. Set the login parameters.

    Example:

    • Serial Line to connect to: COMn
    • Speed (baud): 115200
    • Data bits: 8
    • Stop bits: 1
    • Parity: None
    • Flow control: None

    n in COMn indicates a serial port number, and its value is an integer.

  4. In the navigation tree, choose Session.
  5. Select Serial under Connection type, as shown in Figure 9-15.

    Figure 9-15 PuTTY Configuration window

  6. Click Open.

    The PuTTY window is displayed.

  7. Enter the user name and password.

    If the login is successful, the server host name is displayed on the left of the prompt.

Translation
Download
Updated: 2018-11-26

Document ID: EDOC1000080031

Views: 125959

Downloads: 2333

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next