No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI X6000 Server Upgrade Guide (iBMC) 05

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Upgrade

Verifying the Upgrade

Verification Checklist

Table 6-1 describes the BIOS upgrade verification checklist.

Table 6-1 Verification checklist

No.

Item

Expected Result

1

BIOS operating status

The server BIOS is operating properly.

2

BIOS version

The BIOS is of the target version.

Verification Procedure and Troubleshooting

Procedure

Check whether the BIOS is of the target version after system power-on. For details, see Checking Server Software Versions.

Troubleshooting

Contact Technical Support if the BIOS does not start after the upgrade.

If the BIOS is not of the target version or an error message is displayed, upgrade the BIOS again. If the BIOS still cannot be upgraded successfully, record the steps you have taken and the results, and send the information to Technical Support.

Translation
Download
Updated: 2018-08-02

Document ID: EDOC1000081650

Views: 11662

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next