No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI X6000 Server Upgrade Guide (iBMC) 05

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Upgrade

Verifying the Upgrade

Verification Checklist

Table 7-1 describes the HMM upgrade verification checklist.

Table 7-1 Verification checklist



Expected Result


HMM version

The HMM is of the target version.

Verification Procedure and Troubleshooting


  1. Log in to the HMM CLI again.

    For details, see Logging In to the Server Over a Network Port by Using PuTTY.

  2. Check whether the HMM is of the target version.

    For details, see Checking the HMM Software Version.

    Ensure that the HMM version is correct.


If the login fails, contact Technical Support.

If the HMM is not of the target version or an error message is displayed, upgrade the HMM again. If the upgrade still fails, record the operations you have taken, and send the information to Technical Support.

Updated: 2018-08-02

Document ID: EDOC1000081650

Views: 12198

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next