No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

HUAWEI X6000 Server Upgrade Guide (iBMC) 05

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying the IP Address of the iBMC Management Network Port (Grantley Platform)

Querying the IP Address of the iBMC Management Network Port (Grantley Platform)

Scenarios

Query the IP address of the iBMC management network port in BIOS.

Table A-1 lists the default IP addresses of the iBMC network port.

Table 9-1 IP

Slot

Default IP Address

Slot1

10.10.1.101

Slot2

10.10.1.102

Slot3

10.10.1.103

Slot4

10.10.1.104

Impact on the System

This operation has no adverse impact on the system.

Prerequisites

Conditions

No special condition is required for this operation.

Data

Data preparation is not required for this operation.

NOTE:

Procedure

  1. Restart the server.

    1. Upon server startup, press Delete within 3 seconds until the BIOS Setup Utility screen is displayed.
    2. Enter a BIOS password as prompted, as shown in Figure A-1.
      Figure 9-1 Entering a BIOS password

  2. Enter the BIOS.

    NOTE:

    The BIOS setup screen varies according to the CPU platform. For details, see the BIOS document of the server you use.

    The Main screen is displayed, as shown in Figure A-2.

    Figure 9-2 Main screen

  3. Select the Advanced screen using arrow keys, as shown in Figure A-3.

    Figure 9-3 Advanced screen

  4. On the Advanced screen, select IPMI iBMC Configuration using arrow keys and press Enter, as shown in Figure A-4.

    Figure 9-4 IPMI iBMC Configuration screen

  5. On the IPMI iBMC Configuration screen, select iBMC Configuration using arrow keys and press Enter, as shown in Figure A-5.

    Figure 9-5 iBMC Configuration screen

    The server IP address is displayed on this screen.

    NOTE:

    The default BIOS password is Huawei12#$.

Translation
Download
Updated: 2018-08-02

Document ID: EDOC1000081650

Views: 11663

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next