No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


HUAWEI X6000 Server Upgrade Guide (iBMC) 05

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing HMM Alarm Information

Viewing HMM Alarm Information


View alarm information of the server.

Impact on the System

This operation has no adverse impact on the system.



No special condition is required for this operation.


Data preparation is not required for this operation.


  1. Log in to the HMM CLI. For details, see Logging In to the Server Over a Network Port by Using PuTTY.
  2. Run the ipmcget –d healthevents in the HMM CLI.

    iBMC:/->ipmcget -d healthevents 
    Event Num  | Event Time                     | Entity Name          | Sensor Name          | Alarm level  | Event Desc 
    1          | 2014-10-10 Friday 11:43:43     | PowerSupply1         | PS1 Status           | Critical     | Power Supply input lost(AC/DC) 
    2          | 2014-10-10 Friday 11:44:39     | MainBoard            | Mngmnt Health        | Minor        | Sensor access degraded or unavailable, Sensor is Power1 

Updated: 2018-08-02

Document ID: EDOC1000081650

Views: 11616

Downloads: 134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next