Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing RTU License Information
Viewing RTU License Information (CLI)
Run the display ap-rtu-status all command to check the RTU license loading status of all APs.
<HUAWEI> display ap-rtu-status all
Info: This operation may take a few seconds. Please wait for a moment.done.
Active: [1] The RTU license is activated on the AP.
Activating(Init):[1] The AC has not delivered the RTU file to the AP.
Activating(Need reboot): [1] The AP has downloaded the RTU license and needs a restart for the license to take effect.
Active fail(Flash memory not enough): [1] The flash memory on the AP is insufficient for storing the license file. Manually clear the flash space on the AP.
Active fail(Invalid license): [1] Invalid license file. Verify that the license file is correct.
No RTU license: [1] The license file of the AP does not exist on the AC. Upload the RTU package available for this AP and run the ap rtu load command to decompress the package.
Not support RTU:[2] The AP version or model does not support the RTU license.
Not active:[3] The RTU license on the AC does not have the corresponding AP.
-------------------------------------------------------------
AP ID AP name RTU license SN RTU status
-------------------------------------------------------------
1 AP-1 2102351TYRW0KB001030 Active
2 AP-2 2102353KCN10L1000053 Activating(Need reboot)
3 AP-3 2102353GSF10KC00002 No license on AP
4 AP-4 - No RTU license
5 AP-5 2102353GSF10KC00003 Active fail(Flash memory not enough)
6 AP-6 2102353GSF10KC00004 Active fail(Invalid license)
7 AP-7 2102353GSF10KC00005 Not support RTU
8 AP-8 - Not support RTU
9 AP-9 2102353GSF10KC00006 Activating(Init)
- - 2102353GSF10KC10005 Not active
- - 2102353GSF10KC20005 Not active
- - 2102353GSF10KC30005 Not active
-------------------------------------------------------------
Total: 12
Table 7-1 Description of the display ap-rtu-status all command output
Item |
Description |
|---|---|
AP ID |
AP ID. |
AP name |
AP name. |
RTU license SN |
ESN in the RTU license file, which is not the ESN of the AP. If no ESN or an invalid ESN is contained in a license file, the file is considered invalid and this field is displayed as -. If the license file does not contain the RTU license file for the AP, this field is displayed as -. |
RTU status |
RTU license loading status.
|