Installing an RTU License

Prerequisites

For RTU licenses that are operated on a WLAN AC and take effect for Fit APs:

• The AC version is V200R019C10 or later, or V600R023C00 or later.
• You have logged in to the WLAN AC.
• You have obtained a license file. The RTU license file is a .zip package and does not need to be decompressed.

For RTU licenses that are operated and take effect on a Fat AP:

• The Fat AP version is V200R019C10 or later.
• You have logged in to the WLAN AP.
• You have obtained a license file. The RTU license file is a .zip package and does not need to be decompressed.

For RTU licenses that are operated on iMaster NCE-Campus and take effect for cloud APs:

• You have logged in to iMaster NCE-Campus.
• You have obtained a license file. The RTU license file is a .zip package and needs to be decompressed. License files support batch uploading.

Installing RTU Licenses for Fit APs Using the Web System of an AC

V200:

1. Choose Configuration > AC Config > Basic Config and load the RTU license file.

2. Choose Maintenance > AP Maintenance > AP Restart. Click Restart All RTU Inactive APs. The license takes effect after the AP is restarted.

3. Choose Monitoring > AP and click a specific AP to check RTU license state.

V600:

This operation is not supported currently.

Installing RTU Licenses for Fit APs Using the AC CLI

1. Upload a license file to the root directory of the storage medium on the device. For details, see Installing Licenses.
2. Run the system-view command to enter the system view.
3. Run the wlan command to enter the WLAN view.
4. Run the ap rtu load filename filename command to decompress the RTU license package and automatically deliver the license files to APs.
5. Run the ap-reset wait-rtu-validate command to restart the APs loaded with RTU licenses.
6. Run the display ap-rtu-status all command to check the RTU license loading status of all APs.

Installing an RTU License Using the Web System of a Fat AP

1. Choose Configuration > System Configuration, load the RTU license file, and click Apply. Restart the AP to make the RTU license take effect.

Installing an RTU License Using the CLI of a Fat AP

1. Upload a license file to the root directory of the storage medium on the device. For details, see Installing Licenses.
2. Run the system-view command to enter the system view.
3. Run the wlan command to enter the WLAN view.
4. Run the ap rtu load filename filename command to decompress the license file and automatically load the license file.
5. Run the ap-reset wait-rtu-validate command to restart the APs loaded with RTU licenses.
6. Run the display ap-rtu-status all command to check the RTU license loading status of all APs.

Installing an RTU License for a Cloud AP on iMaster NCE-Campus

1. Choose Maintenance > File Management and click File to upload.

2. Choose Maintenance > Device Maintenance > Activate Device License, select the device to be activated, and click Active. After the license is activated, restart the device for the license to take effect.