License Alarms Are Generated

GTL/4/DEFAULTVALUE:OID [OID] Current license value is default, the reason is [OCTET1], main board name is [OCTET2].

Authentication of the license file failed.

1. Check whether the license file name entered when you activate the license is correct. If not, enter the correct license file name and activate the license again.
2. Collect alarms, logs, and configurations, and then contact technical support personnel.

GTL/4/RESOURCE_USEDUP:OID [OID] Resource item [hwGtlResourceItem] is nearly used up.

The usage percentage of service resources reached or exceeded the threshold defined by the license.

1. Apply for a new license file with sufficient resources.
2. Run the license activefile-name command to activate the new license file.

GTL/4/NEARDEADLINE:OID [OID] License feature [OCTET1] is near deadline, remain time is [INTEGER] days, main board name is [OCTET2].

The license was approaching the deadline and soon would become invalid.

1. Apply for a new license file before the deadline.

2. Run the license active file-name command to activate the new license file.

GTL/4/NOTCOMMERCIAL:OID [oid] Current license is not commercial.

A non-commercial license is used. This alarm is generated when you log in to the device or activate the license.

Delete the current non-commercial license and activate a commercial license.

GTL/4/EMERGENCYSTART:OID [OID] License emergency is started.

The license is in emergency state after you run the license emergency command.

The alarm is informational only, and no action is required.

GTL/4/EMERGENCYSTOP:OID [OID] License emergency is stopped after 7 days.

The validity period of the emergency state expires.

The alarm is informational only, and no action is required.