No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show clone general

show clone general

Function

The show clone general command is used to query the information on existing clone tasks.

Format

show clone general [ clone_id=? ]

Parameters

Parameter

Description

Value

clone_id=? ID of a clone task that you want to query its information.

To obtain the value, run "show clone general" without parameters.

Level

Guest

Usage Guidelines

  • To query the basic information on existing clone tasks, run show clone general.
  • To query the detailed information on a specific clone task, run show clone general clone_id=?.

Example

  • To query the basic information on existing clone tasks, run the following command:

    admin:/>show clone general
    Clone ID Clone Name Health Status Running Status
    -------- ---------- ------------- --------------
    0 clone0 Normal Normal
     
    Primary LUN ID Primary LUN Name Primary LUN Capacity
    -------------- ---------------- --------------------
    0 lun0000 5.000GB
  • To query the detailed information on clone task "0", run the following command:

    admin:/>show clone general clone_id=0
     
    Clone ID : 0
    Clone Name : clone0
    Health Status : Normal
    Running Status : Normal
    Primary LUN ID : 0
    Primary LUN Name : lun0000
    Primary LUN Capacity : 5.000GB

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084078

Views: 302501

Downloads: 253

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next