No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change hyper_metro_consistency_group start

change hyper_metro_consistency_group start

Function

The change hyper_metro_consistency_group start command is used to forcibly start a HyperMetro consistency group.

Format

change hyper_metro_consistency_group start consistency_group_id=?

Parameters

Parameter

Description

Value

consistency_group_id=? ID of the consistency group.

Run the "show hyper_metro_consistency_group general" command without parameters to obtain the value.

Level

Administrator

Usage Guidelines

None

Example

To forcibly start HyperMetro consistency group 1, run the following command.

admin:/>change hyper_metro_consistency_group start consistency_group_id=1
DANGER: You are about to forcibly enable host access permissions of member LUNs in the HyperMetro consistency group. 
Ensure that the remote site does not accept host access request. Otherwise, data loss may occur. 
Suggestion: Before performing this operation, disconnect the remote site from hosts.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084078

Views: 317878

Downloads: 253

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next