No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove failover_group vlan_port

remove failover_group vlan_port

Function

The remove failover_group vlan_port command is used to remove specific VLAN ports from a customized failover group.

Format

remove failover_group vlan_port failover_group_id=? vlan_port_list=?

Parameters

Parameter

Description

Value

failover_group_id=? Failover group ID.
  • The value must be an integer between 1 and 1024.
  • To obtain the value, run the "show failover_group general" command without parameters.
vlan_port_list=? List of VLAN ports.
  • To obtain the value, run the "show failover_group member" command.
  • When multiple VLAN ports are entered, separate the port names from each other using commas (,).

Level

Administrator

Usage Guidelines

  • "failover_group_id" supports only the ID of a customized failover group.
  • "vlan_port_list" supports one or more VLAN port names.

Example

  • Remove a VLAN port from a customized failover group.

    admin:/>remove failover_group vlan_port failover_group_id=1 vlan_port_list=vlan1
    DANGER: You are about to remove a member port from a customized failover group. This operation may interrupt services running on logical ports that are associated with the failover group because no port is available for the failover of logical ports. 
    Suggestion: Before performing this operation, ensure that another port in the failover group is available for the failover of logical ports.
    Are you sure you really want to perform the operation?(y/n)y
    Remove VLAN port vlan1 from failover group successfully.
  • Remove VLAN ports from a customized failover group.

    admin:/>remove failover_group vlan_port failover_group_id=1 vlan_port_list=vlan1,vlan2
    DANGER: You are about to remove a member port from a customized failover group. This operation may interrupt services running on logical ports that are associated with the failover group because no port is available for the failover of logical ports. 
    Suggestion: Before performing this operation, ensure that another port in the failover group is available for the failover of logical ports.
    Have you read danger alert message carefully?(y/n)y
    Are you sure you really want to perform the operation?(y/n)y
    Remove VLAN port vlan1 from failover group successfully.
    Remove VLAN port vlan2 from failover group successfully.

System Response

None

Translation
Download
Updated: 2019-04-04

Document ID: EDOC1000084078

Views: 272082

Downloads: 249

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next