No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change interface_module

change interface_module

Function

The change interface_module command is used to modify the properties of a specific interface module.

Format

change interface_module interface_module_id=? mode=?

Parameters

Parameter

Description

Value

interface_module_id=? ID of an interface module.

To obtain the value, run "show interface_module" without parameter.

mode=? Interface module mode.

The value can be "FC", "FCoE/iSCSI", or "Cluster", where:

  • "FC": indicates the interface module work on FC mode.
  • "FCoE/iSCSI": indicates the interface module work on FCoE/iSCSI mode.
  • "Cluster": indicates the interface module work on cluster mode.

Level

Administrator

Usage Guidelines

  • Before performing this operation, ensure that the services of all ports on the interface module are stopped.
  • After performing this operation, create a new network based on the current work mode of the interface card.

Example

To change the mode of interface module whose id is "CTE0.A0" to FC.

admin:/>change interface_module interface_module_id=CTE0.A0 mode=FC
DANGER: You are about to modify the work mode of the interface module.
This operation will cause that the services of all ports on the interface module are interrupted.
Suggestion:
1.Before you perform this operation, ensure that the services of all ports on the interface module are stopped.
2.After performing this operation, create a new network based on the current work mode of the interface module.
Have you read danger alert message carefully?(y/n)Y
Are you sure you really want to perform the operation?(y/n)Y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084078

Views: 276277

Downloads: 250

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next