No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change remote_device user_password

change remote_device user_password

Function

The "change remote_device user_password" command is used to change the user's password that logging in to remote device.

Format

change remote_device user_password remote_device_id=? remote_user=?

Parameters

Parameter

Description

Value

remote_device_id=? ID of a remote device.

To obtain the value, run "show remote_device general".

remote_user=? User name used to log in to a remote device.

The default user is mm_user.

Level

Administrator

Usage Guidelines

If the version of the local device is different from that of the remote device, you need to add a remote device on the newer version device. Otherwise the operation may fail.1:The user used for communication authentication between remote devices.1.1:If the version of the local device is the same with that of the remote device, you need to use the machine-machine user. The machine-machine username is "mm_user".1.2:If the version of the local device is different from that of the remote device, you need to use the super administrator or administrator account on the older version remote device. Obtain the super administrator or administrator account on the remote device.2:Password of the user used for communication authentication between remote devices.2.1:The default password of the machine-machine user is mm_user@storage. To change the password, run "change mm_user password".2.2:The password of the super administrator or administrator account is consistent with the password on the remote device.

Example

To change the password of the logged-in "admin " user to "remote@storage", where the remote device ID is "0".

admin:/>change remote_device user_password remote_device_id=0 remote_user=admin
Password:**************
Reenter password:**************
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084078

Views: 276787

Downloads: 250

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next