No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change hypervault start

change hypervault start


The change hypervault start command is used to back up file system data.


change hypervault start hypervault_id=? action_type=? [ custom_name=? | policy_id=? ]





hypervault_id=? ID of the HyperVault object.

To obtain the value, run the "show hypervault general" command without parameters.

action_type=? Manual backup type.

The value is "local" or "remote", where:

  • "local": to start local backup.
  • "remote": to start remote backup.
custom_name=? Custom name of HyperVault copy.

The value consists of 1 and 31 ASCII characters including digits, letters,and underscores (_).

policy_id=? ID of the HyperVault policy.

To obtain the value, run the "show hypervault_policy general" command without parameters.



Usage Guidelines



  • To backup the primary file system for hypervault task "9747215445131264", run the following command.

    admin:/>change hypervault start hypervault_id=9747215445131264 action_type=local 
    Command executed successfully.
  • To backup the primary and remote file system for hypervault task "9747215445131264", run the following command.

    admin:/>change hypervault start hypervault_id=9747215445131264 action_type=remote
    Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084078

Views: 305174

Downloads: 253

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next