No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add host ib_initiator

add host ib_initiator


The add host ib_initiator command is used to add an IB initiator to a host.


add host ib_initiator host_id=? ib_initiator_wwn=?





host_id=? Host ID.

To obtain the value, run the "show host general" command.

ib_initiator_wwn=? IB initiator WWN.

To obtain the value, run the "show ib_initiator general" command without parameters.



Usage Guidelines

A host can be added with a maximum of 32 initiators.


To add an initiator to host "0", run the following command:

admin:/>add host ib_initiator host_id=0 ib_initiator_wwn=0000000000005678
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084078

Views: 316402

Downloads: 253

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next