No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create vlan general

create vlan general

Function

The create vlan general command is used to create a VLAN.

Format

create vlan general vlan_id=? port_type=? [ eth_port_id=? ] [ bond_port_id=? ]

Parameters

Parameter

Description

Value

vlan_id=? VLAN ID (tag value).

The value is an integer between "1" and "4094".

port_type=? VLAN type.

There are two types of values:

  • eth: physical port
  • bond: bond port.
eth_port_id=? ID of an physical port.

To obtain the value, run the "show port general" command.

bond_port_id=? ID of a bond port.

To obtain the value, run the "show bond_port" command.

Level

Administrator

Usage Guidelines

  • When "port_type" is set to "eth", "eth_port_id" must be specified.
  • When "port_type" is set to "bond", "bond_port_id" must be specified.

Example

  • To create a VLAN whose ID is "1", port type is "eth", and port ID is "ENG0.A2P1", run the following command:

    admin:/>create vlan general vlan_id=1 port_type=eth eth_port_id=ENG0.A2.P1
    Command executed successfully.
  • To check the VLAN you have created, run the following command:

    admin:/>show vlan general
    Name Running Status VLAN ID MTU Port Type Port ID 
    ---------- ----------- ------- ---- ---------- ----------
    ENG0.A2.P0.2 Link Down 2 1500 ETH ENG0.A2.P0 
    ENG0.A2.P1.1 Link Down 1 1500 ETH ENG0.A2.P1

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084078

Views: 299986

Downloads: 253

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next