No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create initiator fc

create initiator fc

Function

The create initiator fc command is used to create a Fibre Channel initiator. You can enable hosts to access storage resources of the storage system using the Fibre Channel initiator.

Format

create initiator fc wwn=? [ alias=? | host_id=? ] [ multipath_type=? [ failover_mode=? [ special_mode_type=? ] ] [ path_type=? ] ] *

Parameters

Parameter

Description

Value

wwn=? World Wide Name (WWN) of a Fibre Channel initiator.

The value is a hexadecimal number that contains 16 characters including letters A to F and digits 0 to 9.

alias=? Initiator alias.

The value contains 1 to 31 characters including digits, letters, underscores (_), periods (.), and hyphens (-).

host_id=? Host ID. Before delivering the host ID parameter in the command of creating a Fibre Channel initiator, ensure that an initiator is added to the host.

To obtain the value, run "show host general".

multipath_type=? Multipathing mode.

The value can be "default" or "third-party", where:

  • default: Huawei multipathing software is used.
  • third-party: Third-party multipathing software is used.
The default value is "default".
failover_mode=? Failover mode of the initiator after the update.

The value can be "old_alua", "common_alua", "no_alua", or "special_mode", where:

  • old_alua: ALUA of an earlier version.
  • common_alua: common ALUA.
  • no_alua: ALUA not used.
  • special_mode: special mode ALUA.
The default value is "old_alua".
path_type=? Path type after the update.

The value can be "non-optimized" or "optimized", where:

  • non-optimized: non-optimized path.
  • optimized: optimized path.
The default value is "optimized".
special_mode_type=? Special mode type of the initiator.

The value ranges from "mode0" to "mode15". Run the "show tgt_alua_config switch" command to obtain the switch value of the special mode type. If the switch value is "on", the special mode type is valid; otherwise, the special mode type is invalid, press Ctrl+A to view the available list.

Level

Administrator

Usage Guidelines

Parameters of "multipath_type", "failover_mode", "path_type", and "special_mode_type" must be set based on the multipathing type and host operating system version. For recommended configurations in different scenarios, see the description of configuring multipathing in the Huawei SAN Storage Host Connectivity Guide for your desired operating system.

Example

Create a Fibre Channel initiator whose WWN is "455856585f654578".

admin:/>create initiator fc wwn=455856585f654578
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-04

Document ID: EDOC1000084078

Views: 273056

Downloads: 249

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next