No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change dns_server general

change dns_server general

Function

The change dns_server general command is used to modify information about the management DNS server of a storage array.

Format

change dns_server general [ address=? ] [ check_switch=? ] [ check_period=? ]

Parameters

Parameter

Description

Value

address=? List of DNS server IP addresses.

A maximum of three IP addresses are supported. Separate the IP addresses with commas (,). For example, address=192.168.1.9,192.168.2.9,192.168.3.9. Both IPv4 and IPv6 addresses are supported.

check_switch=? Automatic check switch.

The automatic check switch can be turned on or off. By default, it is turned on.

check_period=? Automatic check period.

The automatic check period ranges from 1 to 30 minutes and the system default value is two minutes.

Level

Administrator

Usage Guidelines

None

Example

Setting the IP addresses of the DNS server to 192.168.1.9, 192.168.2.9, and 192.168.3.9, turning on the automatic check switch, and setting the check period to two minutes.

 
admin:/>change dns_server general address=192.168.1.9,192.168.2.9,192.168.3.9 check_switch=on check_period=2
Command executed successfully.
 

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084078

Views: 316217

Downloads: 253

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next