No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add logical_port ipv6_route

add logical_port ipv6_route

Function

The add logical_port ipv6_route command is used to add the logical port IPv6 route.

Format

add logical_port ipv6_route logical_port_name=? type=? [ ipv6_address=? ] [ ipv6_mask=? ] ipv6_gateway=? [ table_type=? ]

Parameters

Parameter

Description

Value

logical_port_name=? Logical port name.

To obtain the value, run "show logic_port general".

type=? Logical port route type.

The value can be "net", "host", or "default", where:

  • "net": indicates a route to the target network segment.
  • "host": indicates a route to the target host.
  • "default": indicates a default route. If there is no route to the target network segment or the target host, the target host accesses the storage system through the default route.
ipv6_address=? Logical port IPv6 address.

The value must be an IPv6 address.

ipv6_mask=? Logical port IPv6 mask.

-

ipv6_gateway=? Logical port IPv6 gateway.

-

table_type=? Logical port route table type.

The value can be "all", "policy_table", or "default_table", where:

  • "all": indicates a policy and default route table.
  • "policy_table": indicates a policy route table.
  • "default_table": indicates a default route table.

Level

Administrator

Usage Guidelines

  • When the value of type is net or host, the parameter ipv6_address is expected.
  • When the value of type is net, the parameter ipv6_mask is expected.

Example

Add IPv6 route for the logical port.

admin:/>add logical_port ipv6_route logical_port_name=rty type=net ipv6_address=4010:: ipv6_mask=32 ipv6_gateway=2011::1
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-04

Document ID: EDOC1000084078

Views: 275260

Downloads: 250

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next