No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show hyper_metro_pair general

show hyper_metro_pair general


The show hyper_metro_pair general command is used to query HyperMetro pairs.


show hyper_metro_pair general pair_id=?





pair_id=? HyperMetro pair ID.

To obtain the value, run "show hyper_metro_pair general".



Usage Guidelines



  • Querying all HyperMetro pairs on the device.

    admin:/>show hyper_metro_pair general
    ID Health Status Running Status Domain Name Type Size Role Local Name Remote Name
    ---------------- ------------- -------------- ------ ----- ------------ ------------------ - -------------------- --------
    200bc79b99520000 Normal Normal HCD001 LUN 100.000GB Preferred LUN001 extLun001
    200bc79b99520002 Normal Normal HCD002 FS 10.000GB Non-preferred FS001 extFS001
  • Querying HyperMetro pair "200bc79b99520000".

    admin:/>show hyper_metro_pair general pair_id=200bc79b99520000
    ID : 200bc79b99520000
    Health Status : Normal
    Running Status : Normal
    Link Status : Linkup
    Domain ID : 1
    Domain Name : HCD001
    Type : LUN
    Size : 100.000GB
    WWN : 200bc78945612300
    IP(s) : --
    Role : Preferred
    Local ID : 5
    Local Name : LUN005
    Local Data Status : Consistent
    Local Access Status : Read And Write
    Remote ID : 5
    Remote Name : extLUN005
    Remote Data Status : Consistent
    Remote Access Status : Read And Write
    Recovery Policy : Automatic
    Sync Progress(%) : --
    Sync Direction : --
    Sync Rate : Middle
    Start Time : 2013-12-22/17:18:32 UTC+08:00
    End Time : 2013-12-22/17:18:32 UTC+08:00
    Isolation Switch : Open
    Isolation Threshold(ms) : 1000
    Consistency Group ID : 1
    Consistency Group Name : cg001

System Response

The following table describes the parameter meanings.




HyperMetro pair UUID. The value contains 64 characters.

Health Status

Health status. The value can be "Normal" or "Faulty".

Running Status

Running status. The value can be "Normal", "Synchronizing", "To Be Synchronized", "Pause", "Forced Start", or "Invalid".

Link Status

Link status. The value can be "Linkup" or "Linkdown".

Domain ID

ID of the HyperMetro domain.

Domain Name

Name of the HyperMetro domain.


Resource type. The value can be LUN or FS.


Resource size.




IP address of the file system share service.


Primary or Secondary/Preferred or Non-preferred. "A/P" indicates active/passive, and "A/A" indicates arbitration is required.

Local ID

ID of the local resource.

Local Name

Name of the local resource.

Local Data Status

Local data status. The value can be "Consistent" or "Inconsistent".

Local Access Status

Local host access status. The value can be "No Access" or "Read and Write".

Remote ID

ID of the remote resource.

Remote Name

Name of the remote resource.

Remote Data Status

Remote data status. The value can be "Consistent" or "Inconsistent".

Remote Access Status

Remote host access status. The value can be "No Access", "Read Only", or "Read and Write".

Recovery Policy

Recovery policy. The value can be "Automatic" or "Manual".

Sync Progress(%)

Synchronization progress (valid for LUNs only). The value ranges from 0% to 100%.

Sync Direction

Synchronization direction. The value can be "Local to Remote" or "Remote to Local".

Sync Rate

Synchronization rate. The value can be Highest, High, Middle, or Low.

Start Time

Start time of the last synchronization.

End Time

End time of the last synchronization.

Consistency Group ID

ID of the owning CG.

Consistency Group Name

Name of the owning CG.

Isolation Switch

Isolation switch: open or close.

Isolation Threshold(ms)

Isolation threshold.

Updated: 2019-07-22

Document ID: EDOC1000084078

Views: 317779

Downloads: 253

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next