No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show port initiator

show port initiator

Function

The show port initiator command is used view the WWN information of all initiators that map to a port.

Format

show port initiator port_type=? port_id=?

Parameters

Parameter

Description

Value

port_type=? Port type.

The value can be "FC", "ETH", "BOND_PORT","FCoE",or"IB", where:

  • "FC": Fibre Channel port.
  • "ETH": Ethernet port (including an iSCSI host port and management port).
  • "BOND_PORT": bond port.
  • "FCoE": FCoE port.
  • "IB": IB port.
port_id=? ID of a port.

The value can be:

  • When the "port_type" value is "ETH", "FC", or "FCoE", you can run "show port general" without parameters to obtain the port ID.
  • When the "port_type" value is "BOND_PORT", you can run "show bond_port" to obtain the port ID.
  • When the "port_type" value is "IB", you can run "show ib_port general" to obtain the port ID.

Level

Guest

Usage Guidelines

None

Example

View information about all initiators that map to port "ENG0.B3.P0".

admin:/>show port initiator port_type=FC port_id=ENG0.B3.P0
WWN               Running Status    Free  Alias  Host ID   Multipath Type 
----------------  ---------------   ----  -----  -------   -------------- 
21000024ff36cedf  Online            Yes   --     --        Default 
 

System Response

None

Translation
Download
Updated: 2019-04-04

Document ID: EDOC1000084078

Views: 275641

Downloads: 250

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next