No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change isns server_ip

change isns server_ip


The change isns server_ip command is used to set the IP address of the Internet Storage Name Service (iSNS) server.


change isns server_ip ip=?





ip=? IP address of the iSNS server.




Usage Guidelines

  • Running this command prevents the storage system from obtaining target information based on the previous IP address of the iSNS server.
  • Before running this command, ensure that the selected iSNS server is normal.


To set the IP address of the iSNS server to "", run the following command:

admin:/>change isns server_ip ip=
WARNING: You are about to change IP address of the iSNS server. This operation will cause that the target information cannot be obtained through the original IP address of the iSNS server.
Suggestion: Before you perform this operation, ensure that you select the correct iSNS server.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084078

Views: 316237

Downloads: 253

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next