No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show certificate general

show certificate general


The show certificate command is used to query certificate information on storage arrays in various scenarios.


show certificate general [ type=? ]





type=? Certificate type.

Possible values are:

"key_management_center": key management center.

"domain_authentication": domain authentication.

"hypermetro_arbitration": hypermetro arbitration.

"https_protocol": https protocol.

"ftps_protocol": ftps protocol.

"syslog_authentication": SYSLOG server authentication.


Guest,vstore guest

Usage Guidelines

  • This command can be used to query certificate status and related information (such as, expiration date) on the storage array in different scenarios.
  • The "show certificate general" command can be used to query information about all certificates.
  • The "show certificate general type=?" command can be used to query information about the certificate in a specific scenario.


  • Query the status of all certificates.

    admin/>show certificate general
      Type                    Status        Expire Time  Expiration Prewarning Time
      ----------------------  ------------  -----------  --------------------------
      Key Management Center   Non-existent  --           30
      Device Management       Valid         2015-10-03   180
      Domain Authentication   Invalid       2015-03-01   7
      HyperMetro Arbitration  Valid         2025-03-07   30
      HTTPS Protocol          Valid         2025-03-07   30
      FTPS Protocol           Valid         2025-03-07   30
      Syslog Authentication   Valid         2025-03-07   30
  • Query the status of the certificate in a specific scenario.

    admin/>show certificate general type=key_management_center
      Type                   Status         Expire Time  Expiration Prewarning Time
      ---------------------  ------------   -----------  --------------------------
      Key Management Center  Non-existent   --           30

System Response

The following table describes the parameter meanings.




Certificate type. The certificate type can be key_management_center, domain_authentication, hypermetro_arbitration, https_protocol, ftps_protocol, or syslog_authentication.


Certificate status. The certificate status can Non-existent, Valid, or Invalid.

Expire Time

Certificate expiration time. "--" is displayed if the certificate does not exist.

Expiration Prewarning Time

Certificate expiration prewarning time. The dafault value is 30 days, the value ranges from 7 to 180.

Updated: 2019-07-22

Document ID: EDOC1000084078

Views: 316192

Downloads: 253

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next