No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change lun_copy general

change lun_copy general


The change lun_copy general command is used to modify the attributes of a logical unit number (LUN) copy. By running this command, you can change the name and LUN copy rate a LUN copy.


change lun_copy general lun_copy_id=? { name=? | copy_speed=? } *





lun_copy_id=? ID of a LUN copy.

To obtain the value, run "show lun_copy general".

name=? An updated name of a LUN copy.

The value contains 1 to 31 characters including digits, letters, underscores (_), hyphens (-), and periods (.).

copy_speed=? Rate of a LUN copy task.

The value can be:

  • "Low": indicates the low copy speed.
  • "Middle": indicates the medium copy speed.
  • "High": indicates the high copy speed.
  • "Highest": indicates the highest copy speed.



Usage Guidelines

Before running this command, ensure that the selected LUN copy is in the normal state.


To modify the attributes of LUN copy "0", where the updated rate of the LUN copy task is "Middle", and the updated LUN copy name is "newname", run the following command:

admin:/>change lun_copy general lun_copy_id=0 name=test copy_speed=Middle
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084078

Views: 317777

Downloads: 253

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next