No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change system_reporter process

change system_reporter process


The change system_reporter process command is used to start or stop the SystemReporter system.


change system_reporter process status=?





status=? State type.

The value can be "start" or "stop", where:

  • "start": starts SystemReporter.
  • "stop": stops SystemReporter.



Usage Guidelines

When running this command, you must specify parameter "status".


  • Start the SystemReporter system.

    admin:/>change system_reporter process status=start
    Command executed successfully.
  • Stop the SystemReporter system.

    admin:/>change system_reporter process status=stop
    WARNING:You are about to stop SystemReporter. This operation disables performance statistics and archive functions. 
    Suggestion: Before performing this operation, ensure that SystemReporter needs to be stopped. 
    Have you read warning message carefully?(y/n)y
    Are you sure you really want to perform the operation?(y/n)y
    Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084078

Views: 304887

Downloads: 253

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next