No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show domain nis

show domain nis

Function

The show domain nis command is used to query NIS domain authentication configurations.

Format

show domain nis

Parameters

None

Level

Guest

Usage Guidelines

None

Example

Query NIS domain authentication configurations.

admin:/>show domain nis
Name : nisdomain 
IP Address List : 10.40.25.10,10.40.25.11,10.40.25.12

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Name

NIS domain name.

IP Address List

IP addresses or host name of the NIS server. A maximum of three IP addresses can be specified, and they must be separated from each other with commas (,).

Translation
Download
Updated: 2019-04-04

Document ID: EDOC1000084078

Views: 275632

Downloads: 250

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next