No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create quorum_server general

create quorum_server general

Function

The create quorum_server general command is used to create a third-place quorum server.

Format

create quorum_server general active_ip=? server_name=? [ active_server_port=? | description=? ] *

Parameters

Parameter

Description

Value

active_ip=? Active IP of the quorum server.

Active IP of the quorum server.

server_name=? Local server name.

The value contains 1 to 31 ASCII characters including digits, letters, underscores (_), hyphens (-), and periods (.), the first character must be a letter or number.

active_server_port=? Server communication port ID.

The value is an integer ranging from 1 to 65535. If this parameter is not specified, the system uses the default port 30002.

description=? Local description of a server.

The value contains 1 to 127 characters.

Level

Administrator

Usage Guidelines

None

Example

To create a third-place quorum server whose IP address is"10.100.2.210", server name is "cps0", run the following command.

admin:/>create quorum_server general active_ip=10.100.2.210 server_name=cps0
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-22

Document ID: EDOC1000084078

Views: 317591

Downloads: 253

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next