No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference 10

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove logical_port ipv4_route

remove logical_port ipv4_route


The remove logical_port ipv4_route command is used to remove the IPv4 route from a logical port.


remove logical_port ipv4_route logical_port_name=? ipv4_address=? ipv4_mask=? ipv4_gateway=?





logical_port_name=? Logical port name.

To obtain the value, run the "show logical_port route" command.

ipv4_address=? Target IPv4 address.

To obtain the value, run the "show logical_port route" command.

ipv4_mask=? Target IPv4 gateway.

To obtain the value, run the "show logical_port route" command.

ipv4_gateway=? Logical port IPv4 gateway.

To obtain the value, run the "show logical_port route" command.



Usage Guidelines

  • Before running this command, check that there is an IPv4 route on the logical port.


To remove the IPv4 address from a logical port, run the following command.

admin:/>remove logical_port ipv4_route logical_port_name=rty ipv4_address= ipv4_mask= ipv4_gateway=
DANGER: You are about to remove the route of logical port.
This operation will interrupt the connection between the storage system and host.
Suggestion: Before you perform this operation, ensure that you have stopped the business on the route.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)
Command executed successfully.

System Response


Updated: 2019-07-22

Document ID: EDOC1000084078

Views: 317791

Downloads: 253

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next