No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference 10

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

"Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions."
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change iscsi initiator_name_v2

change iscsi initiator_name_v2

Function

The change iscsi initiator_name_v2 command is used to change the name of an iSCSI initiator configured for the storage system.

Format

change iscsi initiator_name_v2 iscsi_name=?

Parameters

Parameter

Description

Value

iscsi_name=? An updated last field of an iSCSI initiator name.
NOTE:
The first six fields of an initiator name cannot be changed. Only the last field can be modified.

The value contains 1 to 31 characters including digits, letters, hyphens (-), colons (:), and periods (.).

Level

Administrator

Usage Guidelines

  • Running this command interrupts all services associated with the specified initiator.
  • Before running this command, ensure that all services associated with the specified initiator are stopped.
  • Initiators and targets are relative. In the scenario where storage systems A and B connect to each other in iSCSI mode, from the perspective of storage system A, storage system A is the initiator and storage system B is the target. Likewise, from the perspective of storage system B, storage system B is the initiator and storage system A is the target.
  • The first six fields of an initiator name cannot be changed.

Example

To change the name's last field of the initiator configured for controller to config, run the following command.

admin:/>change iscsi initiator_name_v2 iscsi_name=config
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-04-04

Document ID: EDOC1000084078

Views: 273064

Downloads: 249

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next