No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003 Basic Storage Service Guide for File 16

"This document describes the basic storage services and explains how to configure and managebasic storage services."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Selecting a Primary Port

Selecting a Primary Port

This section describes how to set or modify the primary port of a logical port.


  1. Log in to DeviceManager.
  2. Choose Provisioning > Port > Logical Ports.
  3. Click Create.

    The Create Logical Port dialog box is displayed.

  4. On the Primary Port page, click Browse.

    The Select Primary Port dialog box is displayed.

  5. In Port Type, select the primary port type.

    The primary port types include Ethernet port, Bond port, and VLAN.

  6. In the port list, select the port.
  7. Click OK.
Updated: 2019-08-14

Document ID: EDOC1000084081

Views: 37072

Downloads: 83

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next