No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


File Access and Protocols Feature Guide 13

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

This document describes the implementation principles and application scenarios of the NAS feature. Also, it explains how to configure and manage NAS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling/Disabling the HTTP Service

Enabling/Disabling the HTTP Service

This operation enables you to enable or disable the HTTP service.


A file system whose HTTP service must be enabled has been created.


  1. Log in to OceanStor DeviceManager.
  2. Choose Settings > Storage Settings > File Storage Service > HTTP Service.
  3. In HTTP Service, select Enable.

    If you want to disable the HTTP service, deselect Enable.


    When the HTTP service is disabled, the system automatically deletes information about shared file systems and directories. When the HTTP service is enabled again, configure the HTTP shared file systems and directories.

  4. In Max. Number of Connections, enter the number that the FTP share support.


    The maximum number of connections varies depending on the device model.

  5. Optional: In HTTP Default Port, select Enable.

    Exercise caution when enabling the HTTP port.

  6. In File System, select the file system whose HTTP service you want to enable.


    If you want to enable the HTTP service for a folder in the file system, enter the folder name in Folder.

  7. Click Save.

    The Success dialog box is displayed.

  8. Click OK.
Updated: 2019-08-14

Document ID: EDOC1000084098

Views: 32865

Downloads: 72

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next