No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

File Access and Protocols Feature Guide 11

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

This document describes the implementation principles and application scenarios of the NAS feature. Also, it explains how to configure and manage NAS.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the NFS Service

Enabling the NFS Service

Before configuring an NFS share, enable the NFS service for clients to access the NFS share. The storage system supports NFSv3 and NFSv4.

Prerequisites

The license for NFS protocol has been imported and activated.

Context

The system supports NFSv3 and NFSv4.

Procedure

  1. Log in to DeviceManager.
  2. Choose Settings > Storage Settings > File Storage Service > NFS Service.
  3. Enable the NFS service according to the protocol version used when the host mounts NFS share.



    • If the host needs to use NFSv3 to mount shares, select Enable NFSv3.
    • If host uses NFSv4 to mount share, execute the following steps.
      1. Click Advanced and select Enable NFSv4.
      2. After NFSv4 has been enabled, enter the storage domain name in Domain Name.
      NOTE:
      • NFSv4 adopts the user+domain name mapping mechanism, enhancing the security of clients' access to shared resources. It is recommended that host use this version to mount share.
      • In non-domain or LDAP environment, enter the default domain name localdomain.
      • In an NIS environment, the entered information must be consistent with domain in the /etc/idmapd.conf file on the Linux client that accesses shares. It is recommended that both the two be the domain name of the NIS domain.
      • The domain name must be no longer than 64 characters.
      • To disable NFS service, do not select Enable NFSv3/NFSv4.

  4. Click Save.

    The Success dialog box is displayed indicating that the operation succeeded.

  5. Click OK.
Translation
Download
Updated: 2018-07-19

Document ID: EDOC1000084098

Views: 23805

Downloads: 72

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next