No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

File Access and Protocols Feature Guide 13

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

This document describes the implementation principles and application scenarios of the NAS feature. Also, it explains how to configure and manage NAS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating an NFS Share

Creating an NFS Share

After requirement analysis and service planning, you need to configure an NFS share on DeviceManager.

Prerequisites

The storage system and application servers can communicate with each other.

Procedure

  1. Configure a storage system to add it to an LDAP Domain.

    On the navigation bar of the DeviceManager, select > Storage Settings > File Storage Service > Domain Authentication. Input the parameters of the LDAP domain in the LDAP Domain Settings area.

    NOTE:

    Before selecting the LDAPS protocol, import the CA certificate file for the LDAP domain server.

  2. Create a file system.

    The file system provides shared space for an NFS share.

    1. On the DeviceManager page, choose > File System.

      The File System page is displayed.

    2. Click Create.

      The Create File System dialog box is displayed.

    3. In the Create File System dialog box, configure planned parameters. Table 2-18 describes related parameters.

      Table 2-18  Create File System parameters

      Parameter

      Planned Value

      Name

      FileSystem

      Capacity

      1 TB

      Quantity

      3

      Owning Storage Pool

      StoragePool000

      NOTE:

      When creating multiple file systems, the storage system automatically appends a number to each file system name based on the number of file systems to be created for identification. Therefore, the file systems that are created are named FileSystem0000, FileSystem0001, and FileSystem0002 respectively.

    4. Click OK.
  3. Create an NFS share and set the access permission. Such as share the FileSystem001 with a Linux-based host.
    1. On the DeviceManager page, choose > Share.

      The Share page is displayed.

    2. Choose NFS (Linux/UNIX/MAC) > Create.

      The Create NFS Share Wizard: Step 4-1 page is displayed.

    3. In File System, select file system FileSystem0000.
    4. Click Next.

      The Create NFS Share Wizard: Step 4-2 page is displayed.

    5. Click Add.

      The Add Client dialog box is displayed.

    6. Set Type to Network Group and enter ldapgrouplinux in Network Group Name.
    7. Click OK.

      The Create NFS Share Wizard: Step 4-2 page is displayed.

    8. Click Next.

      The Create NFS Share Wizard: Step 4-3 page is displayed.

    9. Click Finish.

      The Create NFS Share Wizard: Step 4-4 page is displayed.

    10. Click Close.
  4. Repeat 3 to share FileSystem0001 and FileSystem0002 respectively with a Mac OS-based host and a VMware host.

    NOTE:

    If FileSystem0001 is shared with a Mac OS-based host, enter ldapgroupmac in Network Group Name in 3.f.

    If FileSystem0002 is shared with a VMware ESX-based host, enter 172.16.211.200 in IP Address in 3.f.

Translation
Download
Updated: 2019-08-14

Document ID: EDOC1000084098

Views: 30090

Downloads: 72

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next