No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

File Access and Protocols Feature Guide 11

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

This document describes the implementation principles and application scenarios of the NAS feature. Also, it explains how to configure and manage NAS.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Accessing Shared Space

Accessing Shared Space

This section describes how the departments access shared space. After an NFS share is configured, users need to map the shared space provided by the storage system to the network drive on the client.

Procedure

  1. Mount the NFS share using the LDAP client that belongs to network group ldapgrouplinux in the LDAP domain.
    1. Run the mount -t nfs -o vers=3,proto=tcp,rsize=1048576,wsize=1048576,hard,intr,timeo=600 172.16.211.20:/FileSystem0000 /mnt command on the Linux-based client to mount the NFS share.

      linux-client:~ #mount -t nfs -o vers=3,proto=tcp,rsize=1048576,wsize=1048576,hard,intr,timeo=600 172.16.211.20:/FileSystem0000 /mnt
      

      linux-client indicates the name of the LDAP client. timeo indicates retransmission time-out (unit: 1/10 seconds, recommended value: 600). 172.16.211.20 indicates the IP address of the logical port. /FileSystem0000 indicates the NFS shared file system to be mounted. /mnt indicates the mount point.

    2. Run the mount command to view the mounted share.

      linux-client:~ # mount
      172.16.211.20:/FileSystem0000 on /mnt type nfs (ro,addr=172.16.211.20)

      The command output indicates that the NFS share of the storage system has been successfully mounted to the Linux-based client that belongs to network group ldapgrouplinux.

  2. Mount the NFS share using the LDAP client that belongs to network group ldapgroupmac in the LDAP domain.
    1. Run the sudo /sbin/mount_nfs -P 172.16.211.20:/FileSystem0001 /volumes/mnt command on the Mac OS based client to mount the NFS share.

      Volumes root# sudo /sbin/mount_nfs -P 172.16.211.20:/FileSystem0001 /volumes/mnt
      

      Volumes root indicates the name of the Mac OS based client that belongs to network group ldapgroupmac. 172.16.211.20 indicates the IP address of the logical port. /FileSystem0001 indicates the NFS shared file system to be mounted. /volumes/mnt indicates the mount point.

    2. Run the mount command to view the mounted share.

      Volumes root# mount
      /dev/disk0s2 on / (hfs, local, journaled) 
      devfs on /dev (devfs, local) 
      fdesc on /dev (fdesc, union) 
      map -hosts on /net (autofs, automounted) 
      map auto_home on /home (autofs, automounted) 
      172.16.211.20:/FileSystem0001 on /Volumes/mnt (nfs) 
      

      The command output indicates that the NFS share of the storage system has been successfully mounted to the Mac OS-based client that belongs to network group ldapgroupmac.

  3. Mount an NFS share in VMware.
    1. Log in to VMware vSphere Client.
    2. Choose Localhost > Configuration > Storage > Add Storage.

      The Add Storage wizard is displayed.

    3. In Select Storage Type, select Network File System. Then, click Next.

      The Locate Network File System page is displayed.

    4. Set parameters. Table 2-19 describes related parameters.

      Table 2-19  Parameters for adding an NFS share in VMware

      Parameter

      Planned Value

      Server

      172.16.211.200

      Folder

      /FileSystem0002

      Datastor Name

      data

    5. Click Next.
    6. Confirm the information and click Finish.
    7. On the Configuration tab page, view the newly added NFS share.
Translation
Download
Updated: 2018-07-19

Document ID: EDOC1000084098

Views: 23670

Downloads: 72

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next