No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

File Access and Protocols Feature Guide 13

OceanStor 18500 V3 and 18800 V3 Mission Critical Storage System V300R003

This document describes the implementation principles and application scenarios of the NAS feature. Also, it explains how to configure and manage NAS.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the Properties of IP Address/Address Segment for a CIFS Share

Modifying the Properties of IP Address/Address Segment for a CIFS Share

This operation allows you to modify the IP addresses or IP address segments that can access a CIFS share.

Procedure

  1. Log in to DeviceManager.
  2. Choose Provisioning > Share > CIFS (Windows/MAC).
  3. From the CIFS share list, select the CIFS share whose IP address or IP address segment you want to modify.
  4. In Accessible IP Address/Address Segment, select the IP address or IP address segment that you want to remove and click Properties.
  5. In IP Address/Address Segment, specify the IP addresses or IP address segments that you want to add.

    NOTE:
    • The IP address segment is in the format of IP address/mask, for example, 192.168.1.100/16. A mixed IP address segment (IPv4 and IPv6) is not supported. The mask of IPv4 ranges from 1 to 32, and the mask of IPv6 ranges from 1 to 128.
    • The IP address or IP address segment can be:
      • A single IPv4 or IPv6 address, for example, 192.168.1.100.
      • An IP address segment, for example, 192.168.1.100/16 or 192.168.1.10~192.168.1.11/30.
    • A maximum of 32 IP addresses or IP address segments can be added.

  6. Click OK.

    The Success dialog box is displayed.

  7. Click OK.
Translation
Download
Updated: 2019-08-14

Document ID: EDOC1000084098

Views: 30255

Downloads: 72

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next